Entry LevelCNC Machinist Resume Example

Use this free entry levelcnc machinist resume sample as your starting point, then tailor it for your experience level and target job.

Experience Level Selector

Entry Level Mid Level Senior Level

CNC Machinist Resume Template (entry level)

Apply Buddy

support@applybuddy.ai | (123) 456-7899 | Silicon Valley, CA

Professional Summary

Entry-level CNC Machinist trained in blueprint reading, GD&T, and manual and CNC operation. Dependable at part loading, deburring, and inspecting to print with calipers and micrometers.

Professional Experience

CNC Machine OperatorJul 2025 - Present

Cascade Precision Works, Kent, WA

Run proven programs on Haas 3-axis VMCs, loading and unloading parts and monitoring for tool wear.
Inspect machined parts with calipers and micrometers to GD&T prints, flagging out-of-tolerance features.
Deburr and finish 400+ parts per shift, maintaining edge-break and surface-finish specs before inspection.

Skills

Blueprint Reading, GD&T, Machine Operation, Precision Measurement, Deburring & Finishing, Haas Controls, Fanuc Controls, Tolerance Control

Education

Machining Technology CertificateJun 2025

Lake Washington Institute of Technology

Certifications

NIMS Machining Level I

Turn This Sample into Your Exact Job-Match Resume

Upload your current resume and tailor it for a specific CNC Machinist posting. We adapt your summary, bullet points, and keyword coverage to fit the role.

Upload Your Resume to Tailor It View CNC Machinist Tailor

Key Skills for CNC Machinist

Blueprint ReadingGD&TMachine OperationPrecision MeasurementDeburring & FinishingHaas ControlsFanuc ControlsTolerance Control

ATS Keywords for CNC Machinist

Use these naturally in your summary, skills, and experience when they reflect your background.

CNC MachinistGD&TG-codeHaasFanucblueprint readingtolerancesprecision measurementdeburringmachiningmicrometersNIMS

How to Write an Entry Level CNC Machinist Resume

An entry-level CNC machinist resume should prove you can safely run machines and hold a print, not just that you finished a program. Anchor it in the controls you know, Haas or Fanuc, plus blueprint reading, GD&T basics, and inspection with calipers and micrometers, and quantify parts run, tolerances checked, or setups you assisted with.

Resume Writing Tips

Name the controls and inspection tools you know

List Haas, Fanuc, or the controls from the posting, and the gauges you use, calipers, micrometers, pin gauges, so a shop sees you can start on the floor with minimal training instead of from zero.

Turn trade school into real work

Reframe program projects as parts: state the material, the machine, and the tolerance you held, such as an aluminum part machined to plus or minus 0.001 inch on a Haas mill, which reads like shop experience.

Show you understand quality from the start

Mention inspecting to a print, using GD&T callouts, and flagging out-of-tolerance features, since shops want an operator who protects quality rather than one who runs scrap without noticing.

Skills to Highlight

Blueprint Reading / GD&T

Describe reading a print and interpreting a datum or tolerance callout, not just listing GD&T, so shops know you can translate a drawing into a part.

Machine Operation

Name the control you ran, Haas or Fanuc, and the task, loading, offset touch-off, cycle start, proving hands-on time rather than classroom exposure.

Precision Measurement

Cite the gauges you use and what you check, such as a bore diameter with a micrometer, so shops trust you to catch a bad part early.

Deburring & Finishing

Mention edge-break and surface-finish work you did to spec, since clean, in-spec parts at inspection reflect an operator who respects the print.

Common Questions

I only have trade-school projects, is that enough?

Yes for operator and entry roles: present school projects like real jobs, the machine, material, and tolerance held, plus any NIMS credential. Shops hiring entry machinists expect training projects and will teach their specific parts.

Do I need to know programming to start?

Not usually. Entry roles want reliable operation, inspection, and setup help; programming comes later. Show you can run proven programs, touch off offsets, and hold a print, and note any G-code exposure honestly.

How do I stand out without shift experience?

Entry-level Carpenter resume example. Focus on apprenticeship training, power tool safety, and general construction labor.

Tape Measure ReadingPower Tool SafetyLumber Handling

View resume

Need a Customized Resume Instead?

Upload your current resume and tailor it to a real CNC Machinist job post in seconds.

Tailor My Resume AI Resume Tailor for CNC Machinist