Mid LevelCNC Machinist Resume Example

Use this free mid levelcnc machinist resume sample as your starting point, then tailor it for your experience level and target job.

Experience Level Selector

Entry Level Mid Level Senior Level

CNC Machinist Resume Template (mid level)

Apply Buddy

support@applybuddy.ai | (123) 456-7899 | Silicon Valley, CA

Professional Summary

CNC Machinist skilled in independent setups, Mastercam edits, and first-article inspection across Haas and Fanuc mills and lathes. Consistently holds tight tolerances with low scrap.

Professional Experience

CNC MachinistAug 2021 - Present

Cascade Precision Works, Kent, WA

Perform complete setups on Haas and Mazak mills, dialing in workholding and tool offsets in under 30 minutes.
Hold tolerances to plus or minus 0.0005 inch on aluminum and stainless parts, keeping scrap under 1%.
Run first-article inspections with micrometers and a CMM, documenting SPC data on critical features.

CNC Machine OperatorJun 2018 - Jul 2021

Summit Tool & Die, Portland, OR

Operated Fanuc-controlled lathes producing 400+ parts per shift at 98%+ first-pass yield.
Edited G-code and tool offsets to correct dimensions and extend tool life 30%.
Reduced cycle time 18% on a high-runner part by re-sequencing operations.

Skills

Machine Setup, G-code / M-code, GD&T, Tolerance Control, First-Article Inspection, CMM Inspection, Mastercam, Scrap Reduction

Education

A.A.S. Machine Tool TechnologyMay 2018

Portland Community College

Certifications

NIMS Machining Level I
NIMS Machining Level II

Turn This Sample into Your Exact Job-Match Resume

Upload your current resume and tailor it for a specific CNC Machinist posting. We adapt your summary, bullet points, and keyword coverage to fit the role.

Upload Your Resume to Tailor It View CNC Machinist Tailor

Key Skills for CNC Machinist

Machine SetupG-code / M-codeGD&TTolerance ControlFirst-Article InspectionCMM InspectionMastercamScrap Reduction

ATS Keywords for CNC Machinist

Use these naturally in your summary, skills, and experience when they reflect your background.

CNC MachinistGD&TG-codeMastercamHaasFanucblueprint readingtolerancesfirst-article inspectionCMMmachine setupmachining

How to Write a Mid Level CNC Machinist Resume

A mid-level CNC machinist resume needs to show independent setups and quality ownership, not just operation. Foreground complete setups on Haas or Fanuc mills and lathes, editing G-code and tool offsets, running first-article inspections, and holding tight tolerances, along with the scrap and cycle-time metrics that prove you deliver good parts without supervision.

Resume Writing Tips

Prove you set up, not just operate

Describe dialing in workholding, tool offsets, and work coordinates from a blueprint, and the setup time you hit, since full setups are what move you past operator pay into skilled machinist work.

Quantify quality and speed together

Pair a tolerance you held with a scrap or cycle-time number, such as plus or minus 0.0005 inch at under 1% scrap, so shops see you deliver precision and productivity at the same time.

Show inspection and documentation

Name first-article inspection, CMM checks, and SPC data you recorded, proving you can verify and document quality, which matters most in aerospace and medical shops.

Skills to Highlight

Machine Setup

Detail a setup you own end to end, workholding, offsets, first article, and the time it takes, so shops see independence rather than button-pushing.

G-code / M-code Editing

Describe editing programs at the control to correct a dimension or extend tool life, showing you can solve problems without waiting on a programmer.

Tolerance Control

State your tightest held tolerance and how you verify it, tying precision to the material and feature so it reads as real capability.

First-Article Inspection

Explain running an FAI and documenting dimensions to the print, proving you can launch a job right and catch issues before a full run.

Common Questions

How do I show I'm past operator level?

Emphasize complete setups from a blueprint, G-code edits, and first-article inspections you run independently. Describing decisions on offsets, tooling, and workholding distinguishes a skilled machinist from an operator running proven programs.

Should I list every machine I've touched?

Prioritize the controls and machine types in the posting, then note range briefly. Depth on Haas mills and Fanuc lathes with tolerances held reads stronger than a long list of every machine you have stood near.

What if I mostly ran high-volume production?

Download this free Electrician resume example for 2026. ATS-optimized template with electrical wiring, blueprint reading, and panel installation.

Electrical WiringBlueprint ReadingPanel Installation

View resume

Need a Customized Resume Instead?

Upload your current resume and tailor it to a real CNC Machinist job post in seconds.

Tailor My Resume AI Resume Tailor for CNC Machinist